RAL Colour Chart
Universal RAL paint colour chart, K7 collection.The references of the colours shown on the chart are universal and always the same from one manufacturer to the other.Therefore they can be used as a reference for the choice of a colour, which is either available or can be made to order.Remarks :- These colours can also be used for our ...
Details
Oval Horsehair Brush SAPHIR
Genuine horsehair bristles. Varnished beech handle.Remarks :- Available in natural grey or black bristles.- Length = 14 cm, height of bristle = 2,2 cm. - Clean regularly with Renomat Saphir, see below.
Details
Cotton Cloths for DIY
Cotton cloths cut from cotton sheets.This fabric is very hardwearing and absorbant and particularly adapted for DIY.The size can vary from 20 cm to 40 cmside-length. Available per unit or in boxes of 120 pieces of great quality sorted out by hand, or in boxes of 10 kg in bulk. Attention: the quality of the cloths /piece or of the box ...
Details
Glue Remover LOCTITE
To eliminate and unstick traces of glue, badly glued objects, stains, glued fingers etc... within a few hours.Remarks :Do not use for glue on paint or fragile surfaces.
Details
Dry Air Extra Powerful Dust Remover Spray
Spray can for blowing dry air in all positions to eliminate dust from delicate surfaces such as optical scanners, cameras, time-pieces, computers, braided leather etc...Functions with 134A propulsion gas; which guarantees complete drying of the discharged air to prevent bad connections on electric appliances.Remarks :- Includes an extension tube for a very accurate application.- 237 gr net weight ...
Details
WD40 Professional
- Double position Spray presentation - The product with 5 functions :1 - Eliminates humidity : on electric or electronic circuits, non- conductive, avoids short-circuits. 2 - Lubricates : without silicone, does not attract dust and dirt, very useful on small mechanisms. 3 - Protects : against water, humidity and their corrosive effect with the passing of time. ...
Details
Protective Cover for ELIPSE P3 Masks -SPM001CIEA
Protective cover for ELIPSE P3 masks.Remarks:- Not suitable for the INTEGRA P3 mask.
Details
Mask with Valve FFP2 !!!
Mask for respiratoy protection approved FFP2, to protect against solid and liquid particles of mediom toxicity. 94% filtering power.Used for sanding down soft wood, composite materials, rust, putty, plaster or plastic, or for cutting, deburrin,g grinding or perforating metal.Remarks :- in accordance with European directive 89/686/CEE- norm EN149:2001+A1:2009- perfect protection of the mucous membranes of the face.- sold per ...
Details
Protective Peel-Off Films ELIPSE
NEWBag of 10 protective films for the the eyeshades of Protective Masks ELIPSE Integra. These plastic protections can be peeled off, meaning that they can be replaced once they are too dirty. Ideal when you are working in a environment which dirties the eyeshades, for example by liquide discharge. Protective Peel-Off Films ELIPSE help to instantly find again a clear vision.
Details
Protective Mask ELIPSE P3 - SPR337 - SPR502/SPR337
Mask for protection against dust and odours adapted for work in construction, wood, welding, metalurgical industry, cement works, ceramics, poultry farming, glass manufacturing, waste management, fine dust (silica, asbestos etc.)The ELIPQSE P3 Protective Mask combines a mecanical particle filter and an active charcoal membrane. Suitable for particle concentrations inferior to 5000 ppm (particles per mm3).Essential for any handyman. ...
Details
Protective Mask ELIPSE INTEGRA P3 - SPR404 / SPR405
Mask for complete protection. In addition to the features of the Protective Mask Elipse P3 it is equipped with protective goggles which completely cover the eyes and the upper part of the face. The Mask ELIPSE INTEGRA P3 will not only protect your lungs but also your eyes against dust and odours.This mask is very comfortable and does not ...
Details
Filters for Protective Mask ELIPSE P3 and Integra P3 - SPR316/SPR336
Pair of recharge filters for the Protective Masks ELIPSE P3 and Integra P3.Protect from dust, odours, solvents etc. The filters for the Protective Masks ELIPSE P3 can be used until they get dirty and as long as they are comfortable to use, the filter capacity remaining constant at more than 99.95 %.Their life span depends on their conditions under ...
Details
Protective Mask ELIPSE A2-P3 - SPR495/SPR496
Anti dust, anti solvent and anti odour mask for maximum protection against odours, gas and solvents. Efficient and recommended even for concentrations superior to 5000 ppm (particles per mm3).The Protective Mask ELIPSE A2-P3 is suitable for interior and exterior work like sanding, painting, cleaning, stripping, trimming etc., and can be used by professionals or private persons even in in ...
Details
Filters for Protective Masks ELIPSE A2-P3 - SPR497
These filters are sold per pair and are suitable for the new Protective masks ELIPSE A2-P3. - Filters corresponding to the European norm EN14387:2004+A1:2008 andTP TC 019/2011 for use with the Protective Mask Elipse corresponding to the European norm EN140:1998 et TP TC 019/2011. - EU norm EN140: 1998, EN143: 2000+A1, 2006 P3 RD. - Efficiency P3 > 99.95% for particles ...
Details
Protective Mask ELIPSE Integra ABEK1P3 - SPR534 / SPR535
Mask offering the most important and complete protection against all possible risks: odours, dust, different particles, fumes, gas etc.- A : gas and organic vapours.- B : gas and inorganic vapours.- E : acids and acidic gas. - K : ammonia and derivatives of organic ammonia. Remarks: - Delivered with a pair of filters.- latex- and silicone-free.- comfortable and lightweight: 441 ...
Details
Filters for Protective Masks ELIPSE Integra ABEK1P3 - SPR492
Filters sold per pair for the Protective Masks ELIPSE Integra ABEK1P3 (SPR534 et SPR535).Remarks : - The filters can be used until they become clogged or can be changed if the user feels discomfort when breathing in.- The life span depends on the concentration of the contaminant in the work environment and the type of activity.- The level of ...
Details
Protective Cover for ELIPSE Integra - SPM007
NEWProtective Cover for ELIPSE INTEGRA Protective Masks.Remarks:- Not suitable for the masks P, only for the models with Goggles Integra.
Details
MAXI GRATTE
- Multi-use domestic scraper. Scrapes and removes the rests of cooking, paint, mastic, glue etc.. .on all hard and smooth surfaces like window panes, cooktops etc...Use WD40 to dissolve any glues.Delivered with a recharge blade.
Details
Adhesive Tape for Painting
Protective paper tape for painting.Remarks :- Can be torn with your hands.- Width 19 mm.- Length 50 m.
Details
Polishing cotton
NEWPolishing cotton for applying our metal care products to silver, copper and alloys such as brass and bronze.Its consistency allows perfect polishing. Remarks:- bag of 200gr
Details
Duster 5 Liters
Garden duster with a 5 liter capacity.Remarks :- Ergonomic handle for adding pressure.- Pressure indicator.- Hose with release handle.- Adjustable nozzle.
Details
Refill Fringes Rotating Mop Spongio DUO
Refill of microfiber fringes for the Rotating Mop Spongio DUO below.Machine-washable, attach to the broom by a simple click.Remarks : - Make sure you have a Rotating Mop Spongio DUO !!!- Sold individually, without the blue tip on the photo, which is part of the handle.
Details
Protective Glasses
Protective plastic glasses.
Details
Protective Suit
Light-weight resistant protective suit with hood.
Details
Shammy Leather
Shammy leather is ideal for drying and shining car bodies, computer screens, windows, plastic, metal, floor and wall tiles etc. Nowadays, the animal of the same name is protected and the sale of real Chamois skins is forbidden. Therefore, modern Chamois skins are made of sheep skin tanned with fish oil, the quality of the skin depends on the ...
Details
Sandpaper
Sandpaper sheet sold by the unit. Remarks : - size = 23 cm * 28 cm - 180 = thin - 120 = medium - 60 = thick
Details
Diamond Knife Sharpener
Knife sharpener based on diamond powder.Perfect sharpening thanks to the exceptional hardness of diamants. For best results, use in the sense perpendicular to the blade to recreate a microdenture.Remarks :- Place the side "400#" at an angle of 45° in relation to the blade you want to sharpen. - Apply with pressure to the blade and move the tool ...
Details
